Some Information on Plumbing Repairs for Faucet Spouts

Plumbing Repairs for Faucets in Bucks County PA

Faucet spouts are a very common source of water leaks in the home, especially in kitchens and bathrooms. These leaks are not only annoying but can also be quite expensive and cause significant water waste in the home. This is why many homeowners choose to hire a professional plumbing repair company in Bucks County PA to perform faucet repairs in Bucks County PA for them.

Plumbers can perform a variety of different repairs for faucet spouts, including replacing leaking O-rings and fixing the spring and seat washer. The good news is that if you know what to do and have the right tools, a faucet spout repair can be very simple to complete.

Depending on the model of your faucet, you may need to remove the handle and valve stem assembly to get at the faulty part. The faucet handle is usually secured to the valve stem assembly with an Allen screw, which you can unscrew using a Phillips-head screwdriver or an Allen key.

Once the handle and the valve stem are removed, take a close look at the valve for any damage. If you see rust, corrosion, or any other sign of damage, you might need to replace the entire valve or even the whole faucet. If you can’t find any damage, then your faucet probably isn’t broken and may be a symptom of a more serious problem, such as a leaky pipe.

In some cases, a dripping faucet can be fixed by removing the handle and tightening the adjusting ring. In other situations, the dripping will require the removal of the entire faucet and replacement of the handle and/or stem assembly. If you’re not comfortable attempting to replace the entire faucet, a reputable plumber in Bucks County PA can perform the job for you, as long as you have the appropriate tools and experience.

If the dripping is coming from the base of the spout, it will usually be caused by a worn out O-ring that’s located under the spout. Fortunately, these O-rings are fairly simple to replace. Just wiggle the spout enough to access them, and then remove the O-ring.

O-ring kits are available for most faucets, or you can try to find the exact-replacement O-rings at a hardware store or plumbing supply specialist in Bucks County PA. You should also pick up a small tube of plumber’s grease before you begin work to coat the new O-rings.

Changing the O-rings is a relatively easy process, though some models are very difficult to remove. Some older faucets require special wrenches to loosen the O-rings.

After you’ve replaced the O-rings, be sure to coat the stem of the spout lightly with plumber’s grease. You should also be careful not to overtighten the nut on the end of the spindle, as this can damage it.

Then, carefully reinstall the spout by putting it through its opening and installing the locknut. Make sure you use the correct size nut for your particular faucet. If the nut isn’t right, you’ll need to purchase an adapter and attach it to your spout before reinstalling.