Bathroom Sink Faucets Repair in Philadelphia PA
It’s no secret that old bathroom fixtures aren’t always in good condition, and a few simple repairs can often revive them. However, some older sinks and taps are beyond repair or simply don’t have the right look for today’s trends. Replacing them with newer, more modern designs can be a less expensive option.
Luckily, many homeowners can restore their old faucets and other fixtures without hiring a plumbing contractor in Philadelphia PA, and the process involves a number of basic steps. For example, if your faucet has a chrome finish, you can clean it with a commercially available chrome cleaner and polish it with a liquid chrome polish to bring out its shine.
First, you’ll need to remove the handles and set screws from your faucets. You can do this by using a pair of screwdrivers or pliers to open the handle and lift it out. You’ll also need a wrench or other tool to tighten the setscrews and decorative cap as necessary.
Next, examine the cartridge to see how it is installed in the faucet body. Some cartridges have one or two tabs that fit into notches on the faucet’s body, while others have a plastic-covered metal retaining nut that holds the cartridge in place. If your faucet has a compression-type cartridge, you’ll need to loosen and replace the cartridge.
Faucets Repair in Philadelphia PA
Then, you’ll need to reinstall the cartridge in the same orientation as the original, aligning any tabs with the notches on the cartridge and pushing the cartridge all the way into the faucet body. You may need to replace the brass screw that’s held in the top of the cartridge shaft, if there is one.
You can find replacement cartridges at hardware stores and home centers. Typically, they come with new rubber O-rings and some plumber’s grease, which makes it easier to insert the cartridge into the faucet body.
Bathroom Sink Repair in Philadelphia PA
If you don’t have a wrench or pliers, you can use your fingers to hold the cartridge in place while you use a flat-nosed pliers to push down on the sides of the cartridge to release it from the retaining nut. Then, you can carefully remove the retaining nut.
Replacing your faucet’s cartridge can be as easy or as difficult as you choose, depending on the type of faucet you have. Most older two-handle faucets have cartridges, which contain a valve that turns with the handle to control the flow of water into the sink spout.
Bathroom Plumbing Repair in Philadelphia PA
Whether you’re restoring your faucet or replacing it, make sure to take the time to choose the perfect style and color to match your home. Adding in new hardware and a fresh, stylish faucet will give your bathroom a whole new look!
It’s also worth noting that if you decide to repaint your existing fixture, you can usually save money by choosing a cheaper material, like tin or zinc. Those aren’t as durable as gold or copper, but they offer an economical way to refresh a vintage fixture.